IDEAL CONTACT
Pattern is spread evenly over tooth's profile with concentration nearer toe than heel.
COMPETITION CONTACT
Pattern concentrated just up from the toe covering 1/3 to 1/2 of the tooth.
HIGH CONTACT
Pattern is concentrated at the crown of the drive gear tooth.
Move the pinion deeper in towards the differential carrier (add pinion shim
LOW CONTACT
Pattern is concentrated in the root of the drive gear tooth.
Move the pinion out away from the differential carrier (subtract pinion shim
HEEL CONTACT
Pattern is concentrated off the heel end of the drive gear tooth.
Move the ring gear closer to the pinion (decrease backlash) while maintaining minimum backlash.
TOE CONTACT
Pattern is concentrated off the toe end of the drive gear tooth.
Move the ring gear away from the pinion (increase backlash) while maintaining minimum backlash
Distributed by Abu-Iyad
ليست هناك تعليقات:
إرسال تعليق
ممكن نعرف رايك فى المشاركه اللى فاتت
ملحوظة: يمكن لأعضاء المدونة فقط إرسال تعليق.